Skip to content
ARMORTHANE PROTECTING YOUR WORLD

PROTECTING YOUR WORLD

ARMORTHANE PROTECTING YOUR WORLD

Garage Floor
Coating
Contractors

How to vet an epoxy or polyaspartic installer: the prep, the moisture test, what the quote should list, fair 2026 prices and what a lifetime warranty really covers.
Garage Floor Quotes

Want your garage floor specified, not just sold? Get a quote from a certified applicator.

Tell us the garage size, how old the slab is and what's on it now. We'll connect you with an ArmorThane-certified floor coating applicator who lists the prep, the moisture test and every coat on the quote.

  • Diamond grinding or shot blasting, not a quick acid wash
  • Moisture checked before anything goes down
  • Basecoat, flake and topcoat listed on the quote
  • Contractors: ask about ArmorFloor polyaspartic
Rather talk now? Call (417) 831-5090
Step 1 of 3
$1,600–$4,800
Typical coated 2-car garage (400 sq ft)
HomeGuide, garage floor coating cost
$5–$12
Per sq ft, polyaspartic, installed
HomeGuide polyaspartic cost guide
CSP 3+
Profile one-day flake systems call for
Simiron system guides, 2024
50–70%
Share of the price that's labor
HomeGuide

Three contractors look at the same garage. One says $1,900, one says $3,400 and one says $5,800. All three promise a lifetime floor. They're rarely pricing the same job, and the difference is almost never the coating in the bucket. It's what happens to the concrete before the first coat.

Quick answer

Hire a garage floor coating contractor who diamond grinds or shot blasts the slab (not a quick acid wash), tests the concrete for moisture, and puts every layer on the quote: crack repair, basecoat, flake and topcoat, ideally with thickness. A professional 2-car garage (about 400 sq ft) runs about $1,600–$4,800 in HomeGuide's data, with polyaspartic at $5–$12 per sq ft. Read the warranty closely: the one lifetime warranty we could read in full covers materials only and excludes moisture, cracks and tire-shine stains. Check a quote or plan the prep.

This guide is for the moment you have a few bids and need to tell them apart. We'll show you what the prep should be, which tests matter, what a complete quote looks like, what national installers actually promise and where the published prices sit.

A word about who's writing. ArmorThane makes polyurea and ArmorFloor polyaspartic coatings in Springfield, Missouri, and trains the applicators who install them. We'd still rather you hire any contractor who preps and tests properly than one of ours who doesn't.

What's in this guide
  1. 1Garage floor quote checker (interactive)
  2. 2Prep: grinding, shot blasting or acid etch?
  3. 3Prep and moisture planner (interactive)
  4. 4Moisture testing, explained
  5. 5What a complete quote lists
  6. 6Epoxy, polyaspartic or polyurea?
  7. 7What "lifetime warranty" really covers
  8. 8Hot tire pickup: whose fault is it?
  9. 9Red flags and questions to ask
  10. 10What contractors charge in 2026
  11. 11Garage floor contractor FAQ
Interactive tool 1 of 2

Garage floor coating quote checker

Enter what the quote says. The checker works out your price per square foot, compares it with published 2026 ranges for that system, and flags the line items a complete quote should include.

Quote checker

Is this garage floor quote complete, and is the price in range?

Ranges are installed prices from HomeGuide and The Garage Guide. A quote above range isn't wrong if it includes heavy repairs or coating removal.

Used only if you pick Custom
The quote includes
$8.00
Your price per sq ft
$2,000–$4,800
Published range
3 of 8
Quote items covered
Ask more
Verdict

Surface prep

Grinding, shot blasting or acid etch?

A coating can only hold on as well as the concrete it's stuck to. Garage slabs come with a weak top layer (laitance), oil, tire residue and sometimes an old sealer. Prep removes all of that and roughens the surface so the basecoat can grab.

The industry's yardstick is the concrete surface profile (CSP) from ICRI Technical Guideline 310.2R, a set of ten reference chips running from CSP 1 (nearly flat) to CSP 10 (very rough). Contractors compare their prepared floor against the chips. Thin coatings need less profile than thick overlays, but the one-day flake systems many installers sell call for more than a quick scuff. Simiron's one-day polyurea and epoxy flake system guides both say to "diamond grind or shotblast to a CSP-3 or greater surface profile," and one polyaspartic data sheet we reviewed calls for CSP 2 and above depending on the system.

Prep methodWhat it doesWhat it can't doWhat sources say
Diamond grinding with a HEPA vacuumGrinds off the top layer and leaves an even texture; removes thin sealers and coatingsHeavy profiles for thick overlaysArmorPoxy likens a ground floor to 60–120 grit sandpaper. GarageFloorCoating.com calls grinders with HEPA vacuums what professionals use.
Shot blastingSteel shot blasts the surface to a uniform, rougher profileEdges and corners need a hand grinderICRI's guideline lists shot blasting as able to reach CSP 2–9. Garage Force tells buyers to ask for shot blasting to CSP 3.
Acid etchingDissolves some surface cement; cheap and fastWon't remove sealers, oil stains, glues or mastics; residue can clog poresAll Garage Floors: "Acid etching will not remove a sealer." GarageFloorCoating.com: acid etching with a buffer is "an indicator of an amateur applicator."
Sources: ICRI 310.2R overview (Concrete Repair Bulletin, 2014), Simiron system guides (2024), ArmorPoxy (Apr. 2024), All Garage Floors (2020), GarageFloorCoating.com (Dec. 2023), Garage Force (Jul. 2026).

To be fair to acid etching: some coating suppliers still allow it. Legacy Industrial says newer floors can be etched, while older floors should be ground and primed, and ArmorGarage warns that failing to neutralize after etching "is the cause of many hot tire lifting and peeling issues." Most DIY kits are built around etching. But when you're paying a professional $1,600 or more, you're paying for a grinder or a shot blaster. If a bid doesn't mention either, ask.

Prep also shows up on the price. The Garage Guide puts diamond grinding at $1.00–$3.00 per sq ft and old coating removal at $1.00–$3.00 per sq ft; one contractor's 2026 guide puts full coating removal at $3–$8 per sq ft plus disposal. That's why "we'll coat right over your old paint" is the most expensive sentence a contractor can say.

Interactive tool 2 of 2

Prep and moisture planner

Tell the planner about your slab and it lists the prep and testing a careful contractor should include, with published cost ranges for each extra. Take the list with you when you walk the garage with bidders.

Planner

What should the prep line on my quote say?

Cost ranges from The Garage Guide (March 2026) and a contractor's 2026 cost guide. Your contractor's inspection governs.

Signs you've noticed
Grind to CSP 3
Prep to ask for
RH probe test
Moisture test to ask for
$0–$0
Known extras beyond the coating
Moisture

Moisture testing, explained

A garage slab sits on the ground, and ground moisture moves up through concrete as vapor. Under a coating, that vapor pushes. It's one of the most common reasons coated floors blister and peel, and it's the one thing a contractor can't see without testing. There are three tests you'll hear about.

ASTM F2170

In-slab relative humidity

Probes set in holes drilled into the slab (at 40% of its depth) read the humidity inside the concrete. The flooring-industry lab IFTI recommends it for new construction.

ASTM F1869

Calcium chloride

A dish of calcium chloride under a sealed dome measures how much moisture the surface emits, in pounds per 1,000 sq ft per 24 hours. It runs 60–72 hours and is for bare concrete only.

ASTM D4263

Plastic sheet

A sheet of plastic taped to the floor shows whether moisture collects under it. ASTM calls it an indicator of capillary moisture, not a measurement. DIY kits use a version of it.

System (example)F1869 limitF2170 limit
Simiron polyurea base + polyaspartic flake (1-day)3 lb / 1,000 sq ft / 24 h75% RH
CHEMTEC CHEM1000 PG polyaspartic3 lbBelow 80% RH
Simiron 1150FC 100%-solids epoxy at 16 mils12 lb85% RH
Limits from each manufacturer's system guide or data sheet (2024–2025). Your installer should use the limits for the exact products on your quote.

Notice how different those numbers are. The fast-curing systems most one-day installers sell are the most moisture-sensitive in this sample, and Simiron warns that without a vapor barrier under an on-grade slab, seasonal ground moisture "can cause excessive moisture vapor transmission (MVT) regardless of results measured prior to coating application." That's a manufacturer telling you a passing test isn't a guarantee.

What it costs: one contractor's 2026 guide puts moisture testing at $200–$500. If the slab fails, moisture mitigation (usually a special primer) runs $2.00–$5.00 per sq ft in The Garage Guide's March 2026 figures. Cheaper than peeling.

Reading the quote

What a complete garage floor quote lists

A quote that says "full flake polyaspartic floor, $3,200" gives you nothing to compare. Here's what a complete one spells out, with an example of the numbers from a published one-day system.

Line itemWhat good looks likeExample from a published system
Prep method and profileDiamond grind or shot blast, with a CSP targetCSP 3 or greater (Simiron)
Crack and spall repairNamed repair material; moving joints and cracks may still show throughA "flexible elastomeric filler" for cracks (GarageFloorCoating.com)
Moisture testMethod and result, before coating≤ 3 lb and ≤ 75% RH (Simiron polyurea system)
BasecoatProduct name and thickness or coverage ratePolyurea basecoat at 6–8 mils (200–267 sq ft/gal)
FlakeFull or partial broadcast, flake size and blendAbout 6 sq ft per lb, or 240 sq ft per 40 lb box, then scraped
TopcoatProduct name, number of coats and thicknessPolyaspartic at 10–16 wet / 9–14 dry mils
Vertical surfacesStem walls, steps, curbs: included or priced separatelyListed as a price driver by contractors; get it in writing
Return to serviceFoot traffic and vehicle timesVehicles at 24 h (one polyaspartic) to 72 h (some polyurea systems)
Data sheetsA technical data sheet for every productStandard ask; reluctance is a red flag
WarrantyLength, what's excluded, materials and laborSee the warranty section below
Example values from Simiron's SimFlake SB 1-Day Polyurea System Guide (July 2024), the CHEMTEC CHEM1000 PG data sheet (March 2025) and HomeGuide's polyurea cost guide. Different systems use different numbers.

Crack repair is where quotes drift the most. One 2026 contractor guide prices minor crack repair at $250–$800 and structural crack repair above $1,000; The Garage Guide uses $0.50–$2.00 per sq ft. Neither number means much until the contractor has walked your floor. For the flake decision, our epoxy flakes guide covers sizes, full vs partial broadcast and how many pounds a garage takes.

Choosing a system

Epoxy, polyaspartic or polyurea: what contractors sell

Most professional garage floors today are a flake system: a basecoat, a broadcast of vinyl flakes and one or more clear topcoats. The difference between bids is usually the basecoat chemistry and the topcoat.

SystemInstalled cost per sq ftUV resistanceTypical lifespanTypical vehicle return
Epoxy$4–$10 (HomeGuide); $2–$12 (Angi)Poor to fairWater-based 3–5 yrs; solid epoxy up to 20 yrsVaries by product
Polyaspartic$5–$12Excellent10–20+ yrsAbout 24 h
Polyurea base, polyaspartic top$5–$10Depends on the topcoat10–20+ yrs24–72 h
HomeGuide garage floor, polyaspartic, polyurea and epoxy cost guides (Dec. 2024–Feb. 2026); Angi (Aug. 2026); Bob Vila polyaspartic cost guide (2024). Ranges are as published.

Are one-day garage floors any good?

This is the industry's live argument. Garage Force markets a floor "installed in a day" and back in use in 24 hours, and manufacturers like Simiron sell "1-Day" flake systems. GarageFloorCoating.com counters that many one-day polyurea-polyaspartic floors are "about ½ a commercial-grade application," and Granite Garage Floors sells a two-day system as the alternative. Our view as a coatings maker: fast-cure chemistry is real, and a one-day floor can be excellent. What makes it fail is rushing the prep or skipping the moisture test to hit the one-day promise. Judge the bid on those two lines, not on the number of days.

For deeper comparisons, see polyaspartic vs epoxy, polyurea vs polyaspartic, our ranking of the best garage floor coatings and what a polyurea garage floor really is.

Warranties

What "lifetime warranty" really covers

Nearly every national installer advertises a lifetime warranty. Here's what their own websites say, and what the one full warranty document we could read actually covers.

InstallerWhat they publicly claimPublished pricing
Garage Force"Transferrable Lifetime Warranty"; covers "peeling, delamination, and UV damage for the life of your floor"; "lifetime coverage depends on certified installation"; installed in a day, back on the floor in 24 hoursNone current (a 2023 blog cited $4–$9 per sq ft for polyaspartic)
Penntek Industrial Coatings"Limited lifetime manufacturer warranty" through certified dealersNone
GarageExperts"Limited lifetime warranty"; foot traffic in 24 h, vehicles in 72 hNone
Granite Garage Floors"Lifetime Satisfaction Warranty"; "100% Guarantee against hot tire pick up"; two-day installationNone
Wording from each company's website or press release, read September 2026.

The fine print, from a real warranty

Penntek publishes its full residential warranty, which makes it a useful example of how these documents work. It requires registration within 30 days, covers delamination and UV discoloration of the polyaspartic topcoat, and transfers only if the home sells within 12 months of installation. It excludes hydrostatic pressure and excess moisture, cracks, and discoloration from "soft tires, tire shine." And the remedy is materials: "Labor costs… are not covered" except in a recall. It also voids coverage for installation error, including a substrate that wasn't prepared to a specified profile and moisture reading.

That's not a knock on Penntek; it's how most coating warranties are written. It's also why two warranty questions matter more than the word "lifetime": does it cover moisture, and does it cover labor? ArmorGarage calls lifetime claims "mostly marketing hype," and The Garage Guide says quality contractors offer 10–15 year warranties on polyurea and polyaspartic systems and 3–5 years on epoxy. A clear 10-year warranty that includes labor can be worth more than a lifetime one that doesn't.

Five warranty questionsDoes it cover moisture-related failure? Is a moisture-mitigating primer used on every job, or only when a test fails? Is tire staining excluded? Are materials and labor both covered? Is there a data sheet for every product? These come from GarageFloorCoating.com's December 2025 checklist.
Hot tire pickup

Hot tire pickup: whose fault is it?

You park a warm car, and the next morning the coating has lifted in the shape of a tire. It's the complaint installers dread. All Garage Floors explains the mechanics: hot tires soften some coatings, then contract as they cool and "grab" the surface. Weak coatings (especially thin water-based epoxies) and weak bonds fail first. Chemicals matter too. Tire plasticizers can migrate into a coating and stain it, and silicone tire dressings act as a bond breaker.

  • Prep and bond: a well-ground, well-bonded floor resists the pull. Poor prep is the most common root cause.
  • Coating chemistry: thin, soft coatings pick up; harder polyaspartic and 100%-solids systems hold up better.
  • Staining is different from lifting: Simiron's guides say "tire marking may occur" and suggest sheet metal or plexiglass under tires, and Penntek's warranty excludes staining from soft tires and tire shine.
  • Guarantees vary: Granite Garage Floors advertises a 100% guarantee against hot tire pickup. Ask your bidders what theirs covers.
Before you sign

Red flags and questions to ask

Red flags
  • Acid etching with a floor buffer as the only prep.
  • No moisture test, or "we've never had a moisture problem."
  • Won't share technical data sheets.
  • A warranty you can't understand in one read (Garage Force's own test).
  • Product substitutions after you sign.
  • Coating over an old coating or sealer without removing it.
  • Prorated or non-transferable coverage sold as "lifetime."
Questions to ask
  • How will you prepare the floor, and to what profile?
  • Will you test for moisture? Which test, and what's the limit?
  • What exactly goes down: basecoat, flake, topcoat, and how thick?
  • How will you repair cracks and joints?
  • Can I see the data sheet for each product?
  • When can I walk on it, and when can I park on it?
  • Does your warranty cover moisture and labor?
  • Are you licensed and insured, and may I have references?

Questions compiled from HomeGuide, GarageFloorCoating.com and Garage Force's hiring guides (2024–2026), plus our own.

Pricing

What garage floor coating contractors charge

Here is what each major cost guide publishes, as they publish it. Sizes differ: HomeGuide counts a 2-car garage as 400 sq ft; Angi uses 500.

Source (date)Per sq ft1-car2-car3-car
HomeGuide, garage floor coating (Dec. 2024)Epoxy $4–$10; polyaspartic $5–$12; polyurea $5–$10$1,200–$3,500 (288 sq ft)$1,600–$4,800 (400 sq ft)$3,500–$10,400 (864 sq ft)
HomeGuide, polyaspartic (Nov. 2024)$5–$12$1,400–$4,700$2,000–$6,900$2,900–$10,400
HomeGuide, polyurea (Sep. 2025)$5–$10 (materials $2–$4, labor $3–$6)$1,400–$3,900$2,000–$5,800$2,900–$8,600
Angi (Aug. 2026)Epoxy $2–$12$750–$3,000 (250 sq ft)$1,500–$6,000 (500 sq ft)$2,250–$9,000 (750 sq ft)
The Garage Guide (Mar. 2026)Epoxy $3–$7; flake epoxy $5–$8; polyurea $5–$10; polyaspartic $5–$12—400 sq ft: epoxy $1,600–$2,800; polyurea $2,000–$4,000; polyaspartic $2,400–$6,000—
Ranges as each source publishes them. HomeAdvisor (June 2026) reports a typical epoxy job of $1,650–$3,494 and an average of $2,526.

For a calculator that prices your own garage by system, see our garage floor coating cost guide. Considering doing it yourself? Our epoxy garage floor kit comparison covers coverage, solids and when a kit makes sense.

ArmorThane applicators

Where ArmorThane fits, and where it doesn't

We make ArmorFloor aliphatic polyaspartic, polyurea and roll-on floor coatings, and we train the applicators who install them. A certified ArmorThane applicator should quote exactly what this guide asks for: the prep method, the moisture test, the crack repair and every coat by name.

Where we don't fit: if you want the lowest possible price on a light-use floor and you're handy, a well-prepped DIY kit can be the right answer. If your slab fails a moisture test badly, the fix starts with the slab, not the coating. More on our systems on the ArmorFlooring and roll-on floor coatings pages.

Find a certified applicator →ArmorFloor polyaspartic
Glossy full-broadcast flake garage floor coating next to a yellow safety stripe
A full-broadcast flake floor with a clear topcoat.
For contractors

Coat floors without a franchise fee.

Garage floors are one of the steadiest coating jobs there is. We supply ArmorFloor polyaspartic and polyurea systems, train your crew and support you on the phone. Not a franchise: no franchise fee, no royalties.

Start a floor coating businessBecome an applicator

Already coating floors? See our concrete coating systems →

Straight answers

Garage floor contractor FAQ

How do I choose a garage floor coating contractor?

Pick a contractor who diamond grinds or shot blasts the slab, tests for moisture, repairs cracks with a named material and lists every coat (basecoat, flake, topcoat) on the quote. Ask for technical data sheets, references and proof of insurance, and read the warranty for what it excludes, especially moisture and labor.

Should a garage floor be ground, shot blasted or acid etched?

Professionals usually diamond grind (with a HEPA vacuum) or shot blast. Acid etching won't remove sealers or oil stains and can leave residue; GarageFloorCoating.com calls acid etching with a buffer a sign of an amateur applicator. Some suppliers allow etching on newer floors if it's neutralized, but most one-day flake systems call for a mechanically prepared surface, often CSP 3 or greater.

What is CSP and what profile does a garage floor coating need?

CSP means concrete surface profile, a 1–10 scale from the International Concrete Repair Institute (ICRI 310.2R) that describes how rough prepared concrete is. Thin coatings need less profile than thick overlays. Simiron's one-day flake systems call for CSP 3 or greater, and one polyaspartic data sheet calls for CSP 2 and above depending on the system.

Do contractors need to test a garage floor for moisture?

They should. Moisture vapor from the ground is a common cause of blistering and peeling. Common tests are ASTM F2170 (in-slab relative humidity probes) and ASTM F1869 (calcium chloride). Limits depend on the product; one polyurea flake system calls for 3 lb per 1,000 sq ft per 24 hours or 75% RH, while one 100%-solids epoxy allows 12 lb or 85% RH.

How much does a professional garage floor coating cost for a 2-car garage?

HomeGuide puts a 400 sq ft 2-car garage at $1,600–$4,800, with polyaspartic at $5–$12 per sq ft installed. Angi's figures for a 500 sq ft garage run $1,500–$6,000. Prep extras like coating removal, crack repair and moisture mitigation are usually on top.

Are one-day garage floor coatings any good?

They can be. Fast-curing polyurea and polyaspartic systems are designed for one-day installs. Critics argue some one-day jobs are thinner than commercial-grade systems. The deciding factors are whether the contractor preps to the manufacturer's profile, tests for moisture and applies the full system thickness, not the number of days.

What does a lifetime warranty on a garage floor coating cover?

Usually less than it sounds. The full residential warranty we reviewed covers topcoat UV discoloration and delamination, requires registration within 30 days, excludes moisture, cracks and tire-shine staining, and covers materials but not labor. Ask whether the warranty covers moisture failures and labor, and get it in writing.

What causes hot tire pickup on a coated garage floor?

Hot tires can soften weak coatings and pull them up as they cool, especially thin water-based epoxies or floors with poor prep and bond. Tire plasticizers and silicone tire dressings can also stain or weaken the surface. Good prep and harder coatings reduce the risk; staining is often excluded from warranties.

How long before I can drive on a new garage floor coating?

It depends on the system. One polyaspartic data sheet allows vehicles after 24 hours at about 72°F, while some polyurea systems and installers call for 72 hours. Cold weather slows curing. Get the return-to-service time on your quote.

Should the quote include crack repair and stem walls?

Yes, it should say either way. Crack and spall repair should name the repair material, and stem walls, steps and curbs should be listed as included or priced separately. Moving joints and shrinkage cracks can reflect through a coating, so ask how they'll be treated.

Is polyaspartic or polyurea worth the extra cost over epoxy?

Often, in garages that get sun or need a fast return to service. HomeGuide rates polyaspartic's UV resistance excellent and epoxy's poor to fair, and lists polyurea and polyaspartic lifespans of 10–20+ years. Solid epoxy can also last a long time indoors. The prep matters more than the chemistry for how long any floor lasts.

What questions should I ask an epoxy floor installer?

Ask how they'll prep and to what profile, whether and how they test moisture, which products go down and how thick, how they repair cracks, when you can drive on it, whether they'll share data sheets, and whether the warranty covers moisture and labor. Ask for proof of insurance and references too.

AT
ArmorThane Technical Team · Springfield, Missouri
Written from ICRI and ASTM references, manufacturer system guides and data sheets, installer warranties, dated 2024–2026 cost guides and decades of making floor coatings. Last updated September 27, 2026.

Methodology and sources

Prices and warranty claims are shown as each source publishes them, with that source's date. The quote checker uses HomeGuide's per-square-foot ranges (and The Garage Guide's for flake epoxy); the prep planner uses The Garage Guide's and a contractor's 2026 cost ranges. Moisture limits vary by product; your installer's data sheets govern. Company claims are quoted from their websites, not verified by us. Nothing here is legal advice.

  1. ICRI / P. Winkler, Introduction to ICRI Technical Guideline 310.2R-2013 (2014): icri.org (PDF)
  2. DeFelsko, ICRI Concrete Surface Profile Chips: defelsko.com/csp
  3. Simiron, SimFlake SB 1-Day Polyurea System Guide (Jul. 2024): simiron.com (PDF)
  4. Simiron, SimFlake SB 1-Day Epoxy System Guide (Jan. 2024): simiron.com (PDF)
  5. CHEMTEC Coatings, CHEM1000 PG Polyaspartic TDS (Mar. 2025): PDF
  6. ASTM F1869-23, D4263-24 and F2170 scope pages: store.astm.org
  7. IFTI, ASTM F2170 vs. F1869 (Nov. 2025): ifti.com
  8. ArmorPoxy, Grinding vs. Acid Etching Your Concrete Floor (Apr. 2024): armorpoxy.com
  9. All Garage Floors, Why Garage Floor Epoxy Peels Up (2020) and What Causes Hot Tire Pickup (2015): allgaragefloors.com
  10. GarageFloorCoating.com, Questions to Ask a Contractor (Dec. 2023): garagefloorcoating.com
  11. GarageFloorCoating.com via PRUnderground, Warranty Red Flags (Dec. 2025): financialcontent.com
  12. Garage Force, Professional Garage Floor Installers: What to Look for (Jul. 2026) and warranty article (Jun. 2026): garageforce.com
  13. Penntek Industrial Coatings, Limited Lifetime Residential Warranty (2025): PDF
  14. GarageExperts, homepage: garageexperts.com
  15. Granite Garage Floors, warranty page: granitegaragefloors.com
  16. ArmorGarage, FAQ: armorgarage.com
  17. Legacy Industrial, Nohr-S Polyurea Aegis Coating Kit: legacyindustrial.co
  18. HomeGuide, Garage Floor Coating Cost (Dec. 2024): homeguide.com
  19. HomeGuide, Polyaspartic Floor Coating Cost (Nov. 2024): homeguide.com
  20. HomeGuide, Polyurea Garage Floor Coating Cost (Sep. 2025): homeguide.com
  21. HomeGuide, Epoxy Flooring Cost (Feb. 2026): homeguide.com
  22. Angi, Epoxy Flooring Costs (Aug. 2026): angi.com
  23. HomeAdvisor, Concrete Coating Cost (Jun. 2026): homeadvisor.com
  24. The Garage Guide, Garage Floor Coating Cost 2026 (Mar. 2026): thegarage.guide
  25. Duration Concrete Coatings, How Much Does Garage Floor Coating Cost? (Aug. 2026): durationconcretecoatings.com
  26. Bob Vila, Polyaspartic Floor Coating Cost (Jan. 2024): bobvila.com
Floor Coating Newsletter

Floor guides, prices and project ideas in your inbox.

New floor coating guides, price updates and real project examples from the people who make ArmorFloor coatings.

  • Coating comparisons and cost updates
  • Prep and care tips that make floors last
  • Before-and-after projects from certified applicators
Need a price on a project now? Get a free quote or call (417) 831-5090.
Which applications interest you?
Pick all that apply. We only send you what fits.
Optional. Helps us point you to applicators near you.

latest news & bLOGS

Learn more

Buy the prep, not the promise.

Most garage floors that peel were lost before the first coat, in the grinding and the moisture test. ArmorThane-certified applicators put the prep, the products and the thickness on the quote. Contractors: we make the coatings and train your crew, with no franchise fee.

Find a floor coating applicator →Start a floor coating business
United States 417-831-5090 · Canada 780-444-6200

CONTACT US

REQUEST A QUOTE OR

BECOME AN APPLICATOR

ArmorThane has built a strong reputation over the past 30 years for producing high-quality, durable protective coatings.

group 115 660555abebfe4
Phone Number

Tel: 417.831.5090

group 115 1 660556c21395c
Email Us

moreinfo@armorthane.com

Step 1 of 3

We want to help you find the best ArmorThane applicator for your protective coating project. Please either fill out the request form below or call us toll free at 417-831-5090, any time Monday-Friday, 8:00 a.m. to 5:00 p.m. Central Standard Time.

RV Find An Applicator

Step 1 of 3

Connect with an authorized ArmorThane professional to get a long-lasting, seamless protective coating for your RV. Submit the form below or call us directly at 417-831-5090 (Monday–Friday, 8:00 AM – 5:00 PM CST).

Facebook Twitter Youtube

Find An Applicator

Applicator Login

Armorthane Logo Outlined
CALL NOW
BECOME APPLICATOR
FIND APPLICATOR

Protective Coating Applications

Products

Applicator Opportunities

Knowledge Center

Galleries