Application Method
Typical Packaging
Search
ArmorFlooring
Rolled or Floor Coatings
ArmorLine
Sprayed On Coatings
HIGH PRESSURE PRODUCTS
HiChem™
Low PRESSURE PRODUCTS
STS 200 – 2:1 Polyurethane
STS 300 – 2:1 Polyurethane
ArmorFoam
Polyurethane Spray Foam
ArmorCoat
Top Coat Products
ArmorPrime
Primer Products
HiChem™
1:1 Pure Polyurea
HiChem is designed for acid and base environments and is a fast set, rapid curing, 100% solids, flexible, aromatic, two component spray polyurea that can be applied to suitably prepared concrete and metal surfaces. Its extremely fast gel time makes it suitable for applications down to 32oF (0oC). It may be applied in single or multiple applications without appreciable sagging and is relatively insensitive to moisture and temperature, allowing application in most temperatures and environments.
More Details
Typical Physical Properties
Mix Ratio by Volume: 1A:1B | Gel Time @ 160oF (71oC): 5-10 seconds |
Tack Free Time: 40-80 seconds | Recoat Time: 0-2 hours |
Density (Sides A & B combined): 8.75 lbs/gal | Flash Point: >200oF (93oC) |
Hardness, ASTM D-2240: 45 ± 5 D | Tensile, ASTM D-412: 1300 ± 200 psi |
Elongation, ASTM D-412: 40% ± 20 | Tear, ASTM D-624: 230 ± 30 pli |
Service Temperature: -40 to 250oF (-40 to 121oC) | Viscosity at 150-160oF (66-71oC), Brookfield: Side A: 200 ± 100 cps Side B: 500 ± 20 cps |
