Skip to content
ARMORTHANE PROTECTING YOUR WORLD

PROTECTING YOUR WORLD

ARMORTHANE PROTECTING YOUR WORLD

Stock Tank Pool
Liner Options
& Calculator

Vinyl drop-in, paint-on, epoxy or sprayed polyurea: what stops rust in a galvanized stock tank pool, what each costs and lasts, plus gallons, weight and safety math.
Stock Tank Pool Quotes

Want a lining that bonds to the steel? Get a quote from a certified applicator.

Tell us the tank size and shape and whether it's new or already rusting. We'll connect you with an ArmorThane-certified applicator who can prep the galvanized steel and spray a seamless polyurea lining.

  • Seamless lining bonded to the tank
  • Aliphatic topcoat for tanks in full sun
  • Round, oval, large and custom tanks
  • Contractors: add tank and pool linings to your services
Rather talk now? Call (417) 831-5090
Step 1 of 3
1–3 seasons
Until serious rust in an unlined pool tank
One builder's estimate; AGA says months to years
50 ppm
Chloride level AGA calls most aggressive to zinc
Salt pools run about 1,600–2,100 ppm
$199.99–$225
Drop-in PVC liner for 6–10 ft tanks
Swimmly, read September 2026
≈5,200 lb
Water in an 8 ft tank filled to 20 in
Our math at 8.34 lb per gallon

A stock tank pool is a farm water trough doing a job it wasn't sold for. Chlorine, warm water and a pump running all day wear away the zinc that protects the steel. A liner or coating keeps the water off it. Here's every way to do it, what each costs and how long it lasts.

Quick answer

Galvanized stock tanks rust as pools because chlorine, salt and warm, aerated water wear away the zinc; one builder sees serious rust within 1–3 seasons. The cheapest fix is a drop-in PVC stock tank pool liner (about $200–$225 for 6–10 ft tanks). DIY epoxy costs about $1.50 per sq ft per coat; sprayed polyurea about $10–$20 per sq ft installed, bonded to the steel. Compare options or size your tank.

Most search results for a stock tank pool liner are store listings for one product. We compared them all and built two tools: one ranks the options for your tank, the other works out gallons, weight, salt and lining area.

A word about who's writing. ArmorThane makes polyurea coatings in Springfield, Missouri, including AquaSafe and AquaShield, which are certified to NSF/ANSI 61 for drinking water contact, and trains the applicators who spray them. We don't sell tanks or vinyl liners, and for many tanks a liner is the right answer.

What's in this guide
  1. 1Why stock tank pools rust
  2. 2Every lining option compared
  3. 3Liner option chooser (interactive)
  4. 4Drop-in liners: sizing 8 ft and 10 ft tanks
  5. 5Paint-on, epoxy and sprayed polyurea
  6. 6What "NSF 61" does and doesn't mean
  7. 7Stock tank sizes and gallons
  8. 8Stock tank pool calculator (interactive)
  9. 9Base, weight and decks
  10. 10Water chemistry that spares the tank
  11. 11Safety: barriers, permits, electrical
  12. 12Stock tank pool liner FAQ
The problem

Why stock tank pools rust

Galvanized steel is steel coated with zinc, which corrodes first so the steel doesn't. The American Galvanizers Association (AGA) says immersion in pool water "is not a typical application for the hot-dip galvanized coating," and that the coating can last "anywhere from a few months to a few years" there. One stock tank pool blogger sees serious rust within 1–3 seasons.

Chlorine

Too much, too close

Ranch Pools calls over-treating "the primary cause of early rust in a stock tank pool." Tablets on the floor concentrate chlorine against the metal; use a floater.

Salt

Chloride eats zinc

AGA calls chloride "the most aggressive ion to zinc," especially above 50 ppm. Salt systems run 2,700–3,400 ppm salt (Hayward), about 1,600–2,100 ppm chloride by our math.

Heat

Warm water

"Generally, the warmer the water, the higher the attack on zinc," AGA says. Heaters and full sun both count.

Pump

Aeration

AGA: corrosion rates "increase significantly with the presence of aeration," and a filter pump aerates all day.

Water

Soft fill water

Soft water (under 17 ppm hardness) "is much more corrosive to galvanized steel." Harder water lets zinc build a protective scale.

Wear

Scratches and scrubbing

Galvanized "can rust if the zinc coating is scratched or worn down" (Stock Tank Life). Skip abrasive scrubbers.

What isn't the problemNormal pool pH. AGA puts zinc's slowest corrosion at pH 5.5–12, and CDC's pool target of 7.0–7.8 sits inside it. Chlorine, chloride, heat and aeration do the damage, first as white zinc-chloride crust, then as rust. More in our tank corrosion prevention guide.
The options

Every stock tank pool lining option, compared

You can leave the zinc bare, drop in a liner, paint on a rubbery sealant, roll on epoxy or have polyurea sprayed on. Pool kit makers add a sixth: a molded poly tank inside the steel one. Costs are for an 8 ft round tank with about 101 sq ft to line.

OptionRust protectionChlorine and saltCost, 8 ft tankExpected life
No liner (bare zinc)Zinc onlyChlorine wears it; salt is worst$0 now; a new tank is $659.99 (CountyLine 8 ft)Months to a few years (AGA); 1–3 seasons (one builder)
Drop-in PVC linerGood: water never touches the steel"Chlorine-friendly"; keep tablets off it$199.99–$2255–15 yr for pool liners (HomeGuide); one stock tank owner got 6
Poly tank-in-tank kitGood: "rust-proof" poly insertPoly suits chlorine or salt (Stock Tank Life)$3,750–$5,575 as complete pool packagesNot published
Paint-on rubberized sealantOnly while it sticksNo published chlorine or immersion data$109.99 per gallon (Flex Seal); coverage not publishedNot published; peeling reported
Epoxy coatingGood if prep is rightPool paints are made for pool water; epoxy UV rated poor to fairAbout $150–$300 DIY (1–2 coats at 10 mils)2–7 yr for pool paints (ArmorThane, HomeGuide)
Sprayed polyurea + topcoatBonded, seamlessAquatic specs call for chlorine and shock resistance; topcoat for sunAbout $1,000–$2,000 installed20–30+ yr as an aquatic lining (ArmorThane)
Prices read September 27, 2026. Epoxy uses Pond Shield's $359.80 kit for 240 sq ft at 10 mils; polyurea uses the $10–$20 per sq ft installed range in ArmorThane's koi pond guide. Area math and totals are ours. Lifespans are the sources' figures, not warranties.

On cost, a drop-in liner wins for standard round tanks, and it's what we'd point most owners to. On durability, a bonded coating wins: nothing to fold, float or tear. That matters most for oval or oversized tanks, heated or salt pools and multi-tank setups.

Interactive tool 1 of 2

Stock tank pool liner chooser

Pick your tank and how you'll run it. The chooser ranks the five options, counts replacements over your time frame and flags poor fits.

Liner option comparator

Which lining is right for my stock tank pool?

Costs: Swimmly and Angi (liners), Pond Armor (epoxy), ArmorThane's koi pond guide (polyurea), Tractor Supply (tank). Lives: AGA, HomeGuide, Cuckoo4Design and ArmorThane's aquatic coatings guide.

3x2x8 ft oval ≈ 61; see tool 2
CountyLine 8 ft: $659.99
Drop-in PVC liner
Best fit
$200–$225
Upfront cost
5–15 yr
Expected life
101 sq ft
Area to line

Drop-in liners

Sizing an 8 ft or 10 ft stock tank pool liner

Swimmly's stock tank liner, sold through StockTankPool.net, is reinforced PVC it calls "2X thicker" than an average above-ground pool liner, cut for 6–10 ft tanks in 2 in diameter steps from 68 to 120 in. It sold for $199.99 on sale ($225 regular) in September 2026, with no returns once unrolled.

"8 ft" isn't one size: Behlen's 8 ft tank comes in nesting sizes from 89 to 96 in across, its 10 ft from 113 to 120 in. Measure before you order an 8ft or 10 foot stock tank pool liner, and expect "a few folds" if it runs large.

  1. Measure inside, at the rim

    Ovals and rectangles need custom liners; Angi puts liners at $200–$1,000.

  2. Prep the tank

    Clean, dry and knock down sharp rust scale or burrs so nothing presses through the vinyl.

  3. Center and roll the edge

    Center it and "roll the edge over the top rim" evenly (Swimmly). Smooth the floor before filling.

  4. Keep tablets off it

    Tablets touching vinyl fade it. Use a floater.

  5. Drain before hard freezes

    One owner's 8 ft liner lasted six summers before ice damaged it.

Why liners win on cost

Cheap, fast, reversible

At $200–$225, a liner costs about a third of a new 8 ft tank ($659.99 at Tractor Supply) and can salvage a tank that's already rusting or leaking.

Where they fall short

Folds, fading, punctures

Folds trap dirt, sun fades vinyl ("the sun is a relentless overachiever," Swimmly admits) and one puncture ends it. HomeGuide puts pool liners at 5–15 years in general.

Bonded linings

Paint-on, epoxy and sprayed polyurea

A coating bonds to the tank, so there are no folds, but everything rides on prep. Zinc isn't bare steel: AGA points to ASTM D6386 for preparing galvanized surfaces before painting.

Paint-on rubberized sealants

Bob Vila suggests sealing the inside with "Flex Seal, or truck bed coating spray." Flex Seal Liquid ($109.99 a gallon) lists pools among its uses but publishes no coverage, immersion or chlorine data, and the blogger who popularized stock tank liners reports it "peels, especially with pool chemicals." Check any truck bed product for a continuous-immersion rating first; our roll-on bedliner guide covers those kits.

Epoxy

Two-part epoxy is a step up. Pond Shield, a non-toxic epoxy marketed for stock tanks and pools, costs $359.80 for a 1.5 gal kit covering up to 240 sq ft at 10 mils, about $1.50 per sq ft per coat, and cures in about 24 hours above 50°F. Its weak point outdoors is sun: HomeGuide rates epoxy's UV resistance "poor to fair." Pool paints last 2–7 years, figures that come from concrete pools (see our pool resurfacing cost guide).

Sprayed polyurea

Polyurea is sprayed from a heated plural-component rig and sets in seconds (AquaSafe Pure is tack-free in under 45 seconds), building a seamless membrane in one visit. Our shipping container pool guide calls for 60–80 mils in pools, with an aliphatic topcoat where sun hits, and our aquatic coatings guide gives sprayed polyurea a 20–30+ year service life as an aquatic lining.

Cost is the trade-off. At the $10–$20 per sq ft installed range in our koi pond liner guide, an 8 ft tank works out to roughly $1,000–$2,000. A spray-in bedliner on a similar-size truck bed runs $470–$800, but a pool lining needs more prep, more thickness and a topcoat.

Polyurea makes sense

When a liner doesn't fit the job

  • Oval, rectangular or bottomless tanks, or tanks over 10 ft
  • Heated or salt-system pools
  • Several tanks for rentals or glamping sites
  • Tanks that hold animals or fish; AquaShield lists aquatic habitats and livestock facilities
A liner is enough

When polyurea is overkill

  • One new 6–10 ft round tank
  • A few summers of use
  • Chlorine, not salt
  • You're fine replacing a $200 liner now and then
Get a price on a sprayed liningHave an oval tank, a big tank or several to do? Request a free quote at the top of this page and we'll connect you with an ArmorThane-certified applicator who can prep the galvanized steel and spray it. More on the process in our guide to polyurea for pools and fountains.
For contractors

Tanks, ponds and pools are spray work.

Stock tanks, koi ponds, fountains and container pools all need the same thing: a lining that holds up under water. ArmorThane supplies the polyurea and the spray equipment and trains you to apply it. Not a franchise: no franchise fee, no royalty, no dealership fee.

Start a polyurea businessBecome an applicator

A spray rig on a trailer is one of the more flexible mobile business ideas →

Certifications

What "NSF 61" does and doesn't mean

You'll see "NSF 61" on coatings for tanks and ponds, ours included. NSF/ANSI 61 sets "minimum health-effects requirements" for what pipes, fittings, coatings and other components add to drinking water. It "does not establish performance" requirements and isn't a pool standard; pool equipment and chemicals fall under NSF/ANSI 50.

So NSF 61 tells you what a coating adds to water, not how long it lasts in chlorine and sun. Our AquaSafe Pure and AquaShield polyureas are certified to NSF/ANSI 61 for potable water. Listings carry conditions such as tank size and water temperature, so ask for the listing if drinking water matters.

None of the liners, sealants or pond epoxies we reviewed claims NSF 61. That's fine for a pool, but "non-toxic" isn't a certification. For drinking-water tanks, see polyurea water tank coatings.

Sizing math

Stock tank sizes and gallons

Tank makers rate capacity to the brim, and nobody fills a stock tank pool to the brim. The math for your real fill level is simple: floor area in square feet × water depth in feet × 7.48 gallons per cubic foot. A round floor's area is 3.1416 × radius². An 8 ft tank (4 ft radius) filled to 20 in holds 50.3 × 1.67 × 7.48 ≈ 627 gallons.

Tank (Behlen size)Rated gallonsActual sizeArea to lineWater weight, full
6 ft x 2 ft round38965–69 in across, 23.5 in tall66 sq ft3,244 lb
8 ft x 2 ft round70689–96 in across, 23.5 in tall101 sq ft5,888 lb
10 ft x 2 ft round1,117113–120 in across, 23.5 in tall141 sq ft9,316 lb
2 x 2 x 8 ft oval22424–26 x 92–94 in52 sq ft1,868 lb
3 x 2 x 8 ft oval29434–36 x 92–93 in61 sq ft2,452 lb
Rated gallons and sizes: Behlen Country (A/B/C nesting sizes). Area (floor plus 2 ft wall) and weight (rated gallons × 8.34 lb) are our math. CountyLine rates its 8 ft at 700 gal, Angi at 715.

Angi lists 7 ft (550 gal), 9 ft (900 gal) and 11 ft (1,350 gal) tanks too. Poly tanks rate lower: 580 gal for an 8 ft round.

Interactive tool 2 of 2

Stock tank pool calculator

Enter your tank's inside size and fill depth for gallons, weight, pad load, lining area and a salt or chlorine starting point.

Gallons, weight and lining area

How much water, weight and lining does my tank need?

7.48 gal per cubic foot, 8.34 lb per gallon. Salt at Hayward's 3,200 ppm; chlorine per CDC. Deck check against AWC DCA 6's 40 psf design live load.

627 gal
Water at fill depth
5,227 lb
Water weight
104 lb
Load per sq ft of pad
101 sq ft
Area to line or coat

Foundation

Base, weight and decks

Water weighs 62.4 lb per cubic foot, so every foot of depth puts about 62 lb on each square foot of base, whatever the diameter: about 125 lb at 2 ft. Bob Vila says metal tanks "require a solid foundation like concrete and shouldn't be set up on wooden decks."

Gravel pad

Compacted and level

Cowboy Pools specifies decomposed granite "about 3" thick and about 1 foot wider in diameter than your pool," compacted and "perfectly level." Not sand.

Hard base

Concrete or pavers

House Digest lists "compacted granite, concrete, or pavers" on a site free of rocks and stumps, near an outlet for the pump.

Decks

Not without an engineer

AWC's prescriptive deck guide is sized for 40 psf of live load and puts hot tubs "beyond the scope." A full stock tank is about three times that.

Water chemistry

Water chemistry that spares the tank

A liner is the real fix, but chemistry decides how fast an unlined tank goes. CDC's home-pool targets: free chlorine at least 1 ppm (2 ppm with stabilizer) and pH 7.0–7.8, tested at least twice a day.

The trap is dosing. One supplier's 3 in tablets are dosed at one per 5,000 gallons, and an 8 ft tank holds about 700. Ranch Pools advises "minimal concentrations." Use a floater, start small and test.

Chlorine

Low and steady

Hit CDC's minimums, not more, and keep tablets off the floor and liner.

Salt

Only with a full lining

Hayward's optimum is 3,200 ppm, about 19 lb of salt for a 706 gal tank by our math, far past AGA's 50 ppm chloride line. Stock Tank Life calls poly tanks "ideal" for salt.

Stay currentGet new stock tank, pond and pool guides, sizing tools and price updates by email: join the ArmorThane newsletter.
Safety

Safety: barriers, permits and electrical

Two feet of water can drown a toddler. CPSC counts an average of 376 children under 15 who drowned in pool- or spa-related incidents each year from 2021 to 2023; "nearly 80 percent" were under five and "over 70 percent" of deaths were at homes. Its advice: an adult "Water Watcher," barriers and CPR.

Barriers

48 in and self-latching

CPSC's guidelines, which cover above-ground and larger portable pools, call for a 48 in barrier, openings that won't pass a 4 in sphere, self-latching gates and steps that can be "secured, locked or removed."

Permits

Check the depth rule

IRC Appendix G treats any structure for swimming that holds water "more than 24 inches (610 mm) deep" as a pool, and Rockford, Illinois uses that line for permits and a 48 in fence. Litchfield Park, Arizona exempts only portable pools up to 18 in. Ask your HOA too.

Electrical

GFCI and bonding

Per West Bend, Wisconsin's NEC summary, a storable pool's pump cord needs GFCI protection, as do receptacles within 20 ft. Permanent pools add bonding of metal within 5 ft. A steel tank is metal, so ask your inspector.

ArmorThane applicators

A lining that bonds to the steel

ArmorThane has made polyurea and polyurethane coatings since 1989, with certified applicators in more than 50 countries. For tanks that hold water they spray systems such as AquaSafe Pure and AquaShield, prep the steel first and add an aliphatic topcoat where sun reaches the lining.

If you have one round tank and a few summers in mind, buy a liner. If you have an odd-shaped tank, a big one, a heated or salt pool or several tanks to do, find a certified applicator near you and ask for a quote. For new guides and price updates, join the newsletter.

Find a certified applicator →AquaSafe Pure polyurea
Backyard patio with a fireplace next to a pool lined with polyurea
A polyurea-coated backyard pool.
Related guidesConsidering paint instead? Our pool paint guide covers epoxy vs rubber vs acrylic, what can go over what, and cure-to-fill times. Lining a garden, farm or koi pond? Our pond liner guide compares EPDM, RPE, HDPE, PVC and spray-on liners, with a liner size calculator.
Straight answers

Stock tank pool liner FAQ

What is the best liner for a stock tank pool?

For a standard 6–10 ft round tank, a drop-in PVC liner is the best value: about $200–$225 in September 2026, and it keeps chlorinated water off the zinc. A bonded coating makes more sense for oval or oversized tanks, salt or heated pools, or several tanks. Epoxy is the DIY coating; sprayed polyurea, at about $10–$20 per sq ft installed, is the professional one.

Do galvanized stock tank pools rust?

Yes. The American Galvanizers Association says galvanizing immersed in pool water can last anywhere from a few months to a few years, and one stock tank pool builder sees serious rust within 1–3 seasons. Chlorine, salt, warm water and pump aeration all speed zinc loss. A liner or bonded coating keeps the water off the steel.

What size liner do I need for an 8 ft stock tank?

Measure the inside diameter at the rim, because 8 ft tanks vary: Behlen's comes in nesting sizes from 89 to 96 inches across. Stock tank liners are cut in 2 inch steps (Swimmly offers 68 to 120 inches), so order to your measurement and expect a few folds if it runs large.

How many gallons is an 8 ft stock tank pool?

Behlen rates its 8 ft x 2 ft round tank at 706 gallons; CountyLine says 700 and Angi 715. Those are brim figures. Filled to 20 inches, a true 8 ft circle holds about 627 gallons (floor area times depth in feet times 7.48), or about 5,200 lb of water.

Can you use salt water in a stock tank pool?

Not in a bare galvanized tank. Salt systems run 2,700–3,400 ppm salt, roughly 1,600–2,100 ppm chloride, and the American Galvanizers Association calls chloride above 50 ppm the most aggressive ion to zinc. With an intact liner, poly insert or bonded coating it's workable, but any breach exposes steel to very salty water.

Can I paint a stock tank pool or use Flex Seal?

You can, but paint and rubberized sealants have a poor record in pool water. Flex Seal Liquid lists pools among its uses but publishes no coverage, immersion or chlorine data, and the blogger who popularized stock tank liners reports both Flex Seal and paint peeled. Two-part epoxy does better, at about $1.50 per sq ft per 10-mil coat, if the zinc is prepped properly.

Can you spray polyurea or bedliner inside a stock tank?

Yes, with the right product and prep. Sprayed polyurea bonds to steel as a seamless membrane; for pools, ArmorThane specifies 60–80 mils plus an aliphatic topcoat in sun, and its aquatic guide cites a 20–30+ year service life. Expect about $1,000–$2,000 for an 8 ft tank. Check a roll-on bedliner's label for continuous immersion first.

Is a polyurea tank lining NSF certified?

Some are. ArmorThane's AquaSafe Pure and AquaShield are certified to NSF/ANSI 61, the drinking water components standard. It covers what a material adds to drinking water, not durability in a chlorinated pool; pool equipment and chemicals fall under NSF/ANSI 50. The liners and pond epoxies we reviewed make no NSF 61 claim.

How much does a stock tank pool cost?

Angi puts a stock tank pool at $945 on average, typically $610–$1,360, with 8 ft tanks at $280–$570 and filter pumps at $50–$100. Tractor Supply's 8 ft CountyLine tank was $659.99 in September 2026. Add about $200–$225 for a liner. Turnkey packages with poly-lined tanks run $3,750–$5,575.

Do you need a fence or permit for a stock tank pool?

Often. IRC Appendix G treats water more than 24 inches deep as a swimming pool, and cities such as Rockford, Illinois require a permit and a 48 inch barrier at that depth. Some go lower; Litchfield Park, Arizona exempts only portable pools up to 18 inches. CPSC's guidelines call for a 48 inch barrier either way.

What should a stock tank pool sit on?

A compacted, level base: Cowboy Pools specifies about 3 inches of decomposed granite, 1 ft wider than the tank; concrete or pavers also work. Avoid wood decks unless an engineer approves. Prescriptive decks are designed for 40 psf, and a full 2 ft tank puts about 125 lb on each square foot.

AT
ArmorThane Technical Team · Springfield, Missouri
Written from American Galvanizers Association technical articles, tank makers' specifications, CDC and CPSC guidance, NSF standards, retail listings read September 27, 2026 and decades of making polyurea coatings. Reviewed September 27, 2026.

Methodology and sources

Prices are retail listings read September 27, 2026. Areas, weights, salt and multi-year costs are our arithmetic (7.48 gal per cubic foot, 8.34 lb per gallon, salt at 3,200 ppm). The chooser counts replacements at the short and long ends of each published life; lifespans are the sources' figures, not warranties. Epoxy assumes one to two 10-mil coats. General information, not engineering, electrical or legal advice.

  1. American Galvanizers Association, HDG for Waterparks, Pools and Aquatic Facilities (2018); Performance of HDG in Water Environments (2020); Duplex Systems (2025): galvanizeit.org
  2. Behlen Country, Tank Sizing: behlencountry.com
  3. Tractor Supply, CountyLine 8 x 2 ft round stock tank: tractorsupply.com
  4. Agri Supply, Tarter Round Mega 390: agrisupply.com
  5. Swimmly and StockTankPool.net, Stock Tank Pool Liner; Liners; Buy a Stock Tank: stocktankpool.net
  6. Cuckoo4Design, stock tank pool rust (Mar. 2026): cuckoo4design.com
  7. Ranch Pools, Do Stock Tanks Rust? (2023) and pool packages: ranchpools.co
  8. Stock Tank Life, Poly or Galvanized: stocktanklife.com
  9. Cowboy Pools, The Cowboy Pool: cowboypools.com
  10. Bob Vila, How to DIY a Stock Tank Pool (2022): bobvila.com
  11. Angi, Stock Tank Pool Cost (2026): angi.com
  12. HomeGuide, Pool Liner Cost (2026 update), Pool Resurfacing Cost (2025), Polyaspartic Coating Cost (2024): homeguide.com
  13. Flex Seal, Flex Seal Liquid: flexsealproducts.com
  14. Pond Armor, Pond Shield: pondarmor.com
  15. CDC, Home Pool Water Treatment and Testing (2024): cdc.gov
  16. Hayward, How Much Salt Do You Add (2023): hayward.com
  17. PoolSupplies.com, Stock Tank Pool Products: poolsupplies.com
  18. NSF, NSF/ANSI 61; ANSI Blog, NSF/ANSI 50-2025: nsf.org
  19. For Construction Pros, AquaSafe earns NSF-61 certification (Sep. 2025): forconstructionpros.com
  20. American Wood Council, DCA 6 Deck Construction Guide: awc.org (PDF)
  21. House Digest, stock tank pool permits and setup (Oct. 2024): housedigest.com
  22. CPSC, Safety Barrier Guidelines for Residential Pools (Pub. 362) and 2026 drowning report: cpsc.gov
  23. IRC Appendix G (2012, Seattle Residential Code): seattle.gov (PDF)
  24. City of Rockford, Swimming Pools: rockfordil.gov
  25. City of West Bend, Electrical Requirements for Pools (2017 NEC): westbendwi (PDF)
  26. ArmorThane, AquaSafe Pure, AquaShield, Aquatic Coatings, Shipping Container Pools, Koi Pond Liner, Spray-In Bedliner Cost: armorthane.com
Pool and Water Newsletter

Backyard water projects, minus the rust.

Stock tank, pond and pool lining guides, sizing calculators and price updates from the people who make ArmorThane polyurea.

  • New pool, pond and tank lining guides
  • Rust, water chemistry and prep tips
  • Price updates on liners and coatings
Need a price on a project now? Get a free quote or call (417) 831-5090.
Which applications interest you?
Pick all that apply. We only send you what fits.
Optional. Helps us point you to applicators near you.

latest news & bLOGS

Learn more

A stock tank pool is only as good as its lining.

Many tanks do fine with a drop-in liner. When you want a lining bonded to the steel, ArmorThane-certified applicators spray polyurea systems built for water. Contractors: we make the coatings and train your crew, with no franchise fee, royalty or dealership fee.

Find a certified applicator →Start a polyurea coating business
United States 417-831-5090 · Canada 780-444-6200

CONTACT US

REQUEST A QUOTE OR

BECOME AN APPLICATOR

ArmorThane has built a strong reputation over the past 30 years for producing high-quality, durable protective coatings.

group 115 660555abebfe4
Phone Number

Tel: 417.831.5090

group 115 1 660556c21395c
Email Us

moreinfo@armorthane.com

Step 1 of 3

We want to help you find the best ArmorThane applicator for your protective coating project. Please either fill out the request form below or call us toll free at 417-831-5090, any time Monday-Friday, 8:00 a.m. to 5:00 p.m. Central Standard Time.

RV Find An Applicator

Step 1 of 3

Connect with an authorized ArmorThane professional to get a long-lasting, seamless protective coating for your RV. Submit the form below or call us directly at 417-831-5090 (Monday–Friday, 8:00 AM – 5:00 PM CST).

Facebook Twitter Youtube

Find An Applicator

Applicator Login

Armorthane Logo Outlined
CALL NOW
BECOME APPLICATOR
FIND APPLICATOR

Protective Coating Applications

Products

Applicator Opportunities

Knowledge Center

Galleries