Skip to content

PROTECTING YOUR WORLD

Truck Bed Liner:
Spray-In, Drop-In
or Roll-On?

Compare spray-in, drop-in, roll-on, rubber mat and carpet bed liners on cost, lifespan and rust risk, then let the chooser pick one for your truck.
Bedliner quotes

Ready to protect the bed? Get a spray-in quote.

Tell us about the truck and we'll send it to the nearest certified ArmorThane applicator. They'll confirm the price after seeing the bed.

  • Year, make and bed length
  • Over or under the rails
  • Color and UV topcoat preference
  • Your ZIP or postal code
Rather talk now? Call (417) 831-5090
Step 1 of 3
$525–$700
Pro spray-in liner, full-size bed
ArmorThane spray-in bedliner cost guide
$200–$500
Drop-in plastic liner
ArmorThane spray-in bedliner cost guide
$110–$150
DIY roll-on liner kit
ArmorThane spray-in bedliner cost guide
24 hrs
Typical wait before heavy hauling on a fresh spray-in
Installer guidance, ArmorThane cost guide

The first load of gravel, the first toolbox that slides into the bulkhead, the first winter of salty slush sitting in the corrugations: that's when a bare truck bed starts losing paint. A bed liner takes those hits instead. The hard part is picking one, because "bed liner" covers five very different products, from a $110 roll-on kit to a sprayed polyurea skin bonded to the steel.

Below, we compare all five on cost, lifespan and failure points, then a chooser recommends one for how you use your truck. We make spray-in polyurea, and we'll also tell you when it isn't worth the money.

Quick answer

If you plan to keep your truck, a professionally sprayed polyurea bed liner is the best long-term choice. It bonds to the bed, seals out water and grit, and doesn't shift or crack the way a plastic drop-in can. Expect about $525 to $700 for a full-size bed. A drop-in liner ($200 to $500) or a rubber mat makes sense on a lease or a truck you'll sell soon. A DIY roll-on kit ($110 to $150) is the budget route if you're willing to do the prep yourself.

Find an installer

Spray-in bed liner applicators, matched by ZIP

Already leaning toward spray-in? Certified ArmorThane applicators are independent local shops trained to spray our bedliner systems. Tell us where you are and what you drive, and we'll route the request to the closest one. They'll see the bed before giving a firm price, since rust, dents and an old liner change the prep.

Applicator match

Request a spray-in bed liner quote

Enter your ZIP or postal code and a few details. We route the request to the nearest certified ArmorThane applicator; nothing is shared with anyone else.

Enter your ZIP or postal code and pick a project. We'll fill in the request form below, so all you add is your contact details.

Rather call? Our Springfield, Missouri office is at (417) 831-5090. In Canada, ArmorThane Coatings, Inc. is at 780-444-6200. You can also browse the bedliner near me page.

The options

Five kinds of truck bed liner, side by side

Every liner is either bonded to the bed (spray-in and roll-on) or laid in on top of it (drop-ins, mats and carpet). That one difference explains most of what follows, from how long they last to whether they hide rust.

LinerHow it protectsTypical costHow long it lastsWatch for
Pro spray-in polyureaSprayed hot and bonded to the bed. Floor, walls and corrugations become one seamless skin.$525–$700, full-size bedYears. Often the life of the truck when the prep and thickness are right.Shops that cut corners on prep or material; fading in the sun without a UV topcoat
DIY roll-on or spray-canA thinner coating you roll or spray from a kit. It bonds if the bed is prepped well.$110–$150 kitShorter. Expect touch-ups where cargo slides and boots land.All the prep is on you; a thin film wears through sooner
Drop-in plasticA molded shell sits in the bed and takes the impacts so the paint doesn't.$200–$500Years, until it cracks, warps or gets swapped outWater and grit trapped underneath; a shell that shifts and rubs paint
Rubber bed matA heavy mat on the floor only. It grips cargo and cushions drops.Varies by brandThe top wears first; replace it as neededBare walls and wheel wells; moisture under the mat
Carpet or turf-styleA fabric liner that's easy on knees, luggage and furniture.Varies by brandShortest under hard use; stains and wearsHolds water and dirt; not made for gravel, mud or chemicals
Costs from ArmorThane's spray-in bedliner cost guide (national figures, full-size bed). Mats and carpet liners vary by brand. Lifespans are general and depend on use and care. Tap a column heading to sort.
Bonded

No gap means nowhere to hide

A sprayed liner is stuck to the steel, so there's no space for water, sand or road salt to collect. Nothing rattles, nothing shifts, and the tailgate seals the way it did from the factory.

Material

Thickness is the product

A pro typically sprays about 5 gallons of material into a full-size bed. A roll-on kit goes on far thinner. More material on the floor and wheel wells is what lets a liner shrug off years of shovels and pallets.

Sunlight

Black fades unless it's topped

Most bedliner base coats are aromatic polyurea: tough, but prone to fading and chalking in the sun. An aliphatic topcoat holds the color. Our aromatic vs aliphatic guide explains the difference.

Want the full spray-in price breakdown, including brand-name shops and long beds? See the spray-in bedliner cost guide. Weighing a kit? Our roll-on bedliner guide covers what the job involves.

Liner chooser

Which bed liner fits your truck?

Five questions about how you use the truck and how long you'll keep it. The chooser weighs them the way we would if you called us.

Matcher

Truck bed liner chooser

Rules of thumb, not a quote. Cost bands come from ArmorThane's spray-in bedliner cost guide: pro spray-in $525–$700 for a full-size bed (8-ft beds usually about $50 more), drop-in $200–$500, DIY roll-on kit $110–$150. Mats and carpet liners vary by brand. Lease terms differ, so check yours before anything permanent goes in.

How does the bed get used?
—
Recommended liner
—
Cost band
—
Runner-up

    Spray-in cost guide

    The quote button uses the ZIP from the applicator tool above, if you entered one, and fills in the request form at the bottom of the page.

    Hidden damage

    The rust problem under drop-in liners

    A plastic drop-in doesn't seal against the bed. It sits on top. Rain, snowmelt and wash water run in along the edges and pool in the corrugations underneath, and they bring sand and road grime with them. The liner keeps that wet grit pressed against the floor, out of sight and slow to dry.

    Then the truck moves. Every bump shifts the shell a little, and the trapped grit sands away at the paint. Once it's through to bare steel, the moisture underneath starts rust. Most owners find out when they pull the liner to sell the truck.

    Rubber mats can do the same thing on a smaller scale, and carpet-style liners soak water up like a sponge. None of this makes laid-in liners a bad buy. It means they need checking.

    Check under itIf you run a drop-in or a mat, pull it out a few times a year, especially after winter. Rinse the bed, let it dry completely and look for scuffed paint or orange spots in the low channels before you put it back. Catching it early is the difference between a touch-up and a repair.

    A bonded spray-in avoids the gap, but only over clean, sound metal. Spraying over active rust just hides it. If your bed already has rust, start with how to repair truck bed rust with ArmorThane. On salted roads, the frame and underbody need rust-proofing or undercoating too.

    Doing it right

    What a good spray-in job should include

    Two spray-in liners can look identical on pickup day and perform very differently three years later. The difference is almost always in the steps you didn't watch. Here's what a well-run shop does, in order.

    1. Inspect the bed

      The installer looks for rust, dents, old coatings and anything bolted in. Rust gets treated and an old liner gets removed before the new one goes on. See our bedliner removal guide if yours has one.

    2. Scuff and clean

      The factory paint is abraded so the coating has something to grip, then the bed is cleaned of dust, wax and oil. Adhesion is made in this step, not at the spray gun.

    3. Mask everything else

      Rails, cab, tailgate edges, tie-downs and bolt holes get taped and covered. Clean tape lines are the easiest quality signal you can see.

    4. Spray to thickness

      The coating goes on hot through a plural-component rig, built up in passes. Ask the shop what thickness they target and how they check it. Our polyurea thickness guide explains why it matters.

    5. Decide on coverage

      Under-the-rail stops below the bed rails. Over-the-rail wraps the tops of the rails, where tool boxes and ladders rub. Get the price for both in writing.

    6. Topcoat for the sun

      If the truck lives outdoors, an aliphatic UV topcoat over the base keeps a black liner from turning gray. ArmorThane's HighLine 410 is an aliphatic polyurea.

    7. Let it cure

      Light use can come sooner, but plan on about 24 hours before heavy hauling. The shop's product data sheet is the final word.

    Questions to ask any spray-in shop

    • Which product do you spray? (Ours is HighLine 200, our premier bedliner.)
    • How much material goes into a bed my size, and what thickness do you aim for?
    • How do you prep the bed, and what do you do if you find rust?
    • What's the price for under-the-rail versus over-the-rail?
    • Is a UV topcoat included, and what colors and textures can I pick? (See bedliner colors.)
    • What does the warranty cover, for how long, and is it in writing?

    Comparing sprayed liners? Read the best spray-in bedliner.

    By use

    The best bed liner for how you drive

    The right liner depends on how hard the bed works and how long it'll be yours. Here are the picks we'd make.

    Spray-in

    Daily work truck

    Shovels, gravel, pallets and toolboxes every day. Go with a pro spray-in, over the rails if you load from the side or run a rack. A drop-in on a work truck tends to crack and shift long before the truck wears out.

    Spray-in

    Weekend hauler you'll keep

    Mulch, dirt bikes and the occasional couch. Keeping the truck? Spray-in costs more on day one and less over the years. Trading every couple of years? A drop-in or good rubber mat is a fair call.

    Removable

    Leased truck

    Spray-in is permanent, so read the lease before you book anything. Many lessees choose a drop-in or a rubber mat that comes out at turn-in.

    Spray-in

    Fleet and company trucks

    Bonded liners mean fewer replacements and the same spec on every truck. Ask about doing trucks in batches. Our commercial truck coatings page covers larger jobs, and heavy haulers should see dump truck bed liners.

    Not a pickup? The same polyurea goes into Jeep tubs and interiors and trailer floors. If you're measuring for a mat or drop-in, check truck bed dimensions first.

    Care that keeps any liner working

    • Rinse it out. Hose the bed out after hauling salt, fertilizer, manure or anything chemical. Mild soap and a stiff brush handle the rest.
    • Pull laid-in liners seasonally. Drop-ins, mats and carpet liners come out, the bed dries and the paint gets a look before they go back in.
    • Mind the sun. A spray-in without a UV topcoat fades over time. Ask your shop which cleaners and dressings suit its product.
    • Fix damage early. Gouges in a spray-in can be repaired by the shop. Worn spots in a roll-on can be scuffed and recoated. Cracks in a drop-in won't fix themselves.
    Spray-in bed liners

    Bonded to the bed. Built to stay.

    Send us your ZIP and your truck. The nearest certified ArmorThane applicator will look at the bed and quote a sprayed liner that fits how you use it.

    Shops: become an ArmorThane applicator

    FAQ

    Truck bed liner questions

    What is the best type of truck bed liner?

    For a truck you plan to keep, a professionally sprayed polyurea liner is the best all-around choice. It bonds to the bed, seals out water and grit and doesn't shift or crack like a plastic drop-in. On a lease or a truck you'll sell soon, a drop-in or rubber mat is a reasonable, removable option.

    How much does a truck bed liner cost?

    A professional spray-in liner runs about $525 to $700 for a full-size bed, and 8-foot beds are usually about $50 more. Drop-in plastic liners cost about $200 to $500, and DIY roll-on kits about $110 to $150. Rubber mats and carpet-style liners vary by brand.

    Do drop-in bed liners cause rust?

    They can. Water and grit get trapped between the liner and the bed, and as the liner shifts it rubs through the paint. Bare steel plus trapped moisture leads to rust. If you use a drop-in, pull it out a few times a year, rinse and dry the bed and check the paint.

    Is a spray-in bed liner worth it?

    If you keep your truck for years and use the bed, yes. It costs more up front than a drop-in, but it is bonded, seamless and usually lasts as long as most owners keep the truck when it is prepped and sprayed properly. For a short lease, a removable liner may make more sense.

    How long after a spray-in bed liner can I use my truck?

    Plan on about 24 hours before heavy hauling. Light use may be fine sooner, but the cure time on your applicator's product data sheet is the one to follow.

    Can I put in a bed liner myself?

    Yes. A roll-on kit costs about $110 to $150 and works if you prep the bed carefully: scuff, clean and mask before you apply. Expect a thinner coating than a professional spray-in and plan on touch-ups in high-wear spots.

    About these pricesRanges are national figures from ArmorThane's spray-in bedliner cost guide, not a quote. Your applicator prices your truck after seeing the bed, and their written quote governs.
    AT
    Written by the ArmorThane technical team. We make the HighLine polyurea bedliner systems that certified applicators spray, in Springfield, Missouri since 1989. Applicators are independent local businesses trained on our systems.

    Sources

    1. ArmorThane, Spray-in bedliner cost guide (2026): spray-in, drop-in and roll-on price ranges, material use and cure guidance. armorthane.com/spray-in-bedliner-cost/
    2. ArmorThane, The best spray-in bedliner. armorthane.com/best-spray-in-bedliner/
    3. ArmorThane, Roll-on bedliner guide. armorthane.com/roll-on-bedliner/
    4. ArmorThane, Aromatic vs aliphatic polyurea. armorthane.com/aromatic-vs-aliphatic-polyurea/

    Spray it once, keep it for the long haul.

    A bonded polyurea liner from a certified ArmorThane applicator seals the bed and stays put. Send your ZIP and we'll find the closest shop.

    United States 417-831-5090 · Canada 780-444-6200

    CONTACT US

    REQUEST A QUOTE OR

    BECOME AN APPLICATOR

    ArmorThane has built a strong reputation over the past 30 years for producing high-quality, durable protective coatings.

    group 115 660555abebfe4
    Phone Number

    Tel: 417.831.5090

    group 115 1 660556c21395c
    Email Us

    moreinfo@armorthane.com

    Step 1 of 3

    We want to help you find the best ArmorThane applicator for your protective coating project. Please either fill out the request form below or call us toll free at 417-831-5090, any time Monday-Friday, 8:00 a.m. to 5:00 p.m. Central Standard Time.

    RV Find An Applicator

    Protective Coating Applications

    Products

    Applicator Opportunities

    Knowledge Center

    Galleries