If left unsprayed, the surfaces of your vehicle will endure marks, dents, and scuff marks on the paint and other damages that will result in expensive repairs or the development of rust that will cause permanent harm to the metal.

If you’re seeking to give your vehicle a unique look that offers the ultimate level of protection, consider ArmorThane’s ArmorLiner. Trucks, SUVs, and other vehicles with ArmorLiner have a rugged look as well as a protective surface that guards against scratching and denting. ArmorThane ArmorLiner is ideal for everyone from the hardcore off-roader to the custom car enthusiast.

CUSTOMIZABLE QUALITIES:

One of the greatest things about ArmorLiner is the fact that not only can it be completely customized in a way that suits your style, but it also contributes full-body durable security. ArmorLiner remains unyielding to gouging, rips, tears, and scuffs.

ArmorLiner is a two-component, 1 to 1, 100% solid, fast set, liquid applied polyurea liner system for metal, concrete, fiberglass, and wood surfaces.

APPLICATION PROCESS:

Pigmentation: ArmorLiner Side B Polyol Resin requires that 100 grams of ArmorThane pigment be added to every one US gallon.

SURFACE PREPARATION:

In general, coating performance and adhesion are directly proportional to surface preparation. Most failures in the performance of surface coatings can be attributed to poor surface preparation. Polyurea coatings rely on the structural strength of the substrate to which they are applied. All surfaces must be free of dust, dirt, oil, grease, rust, corrosion, and other contaminants. When coating substrates previously used, it is important to consider the possibility of substrate absorption, which may affect the adhesion of the coating system, regardless of the surface preparation. ArmorThane recognizes the potential for unique substrates from one project to another. An adhesion test is recommended prior to starting any project. Refer to the technical bulletins in the ArmorThane Operations Manual concerning the preparation method for the substrate.

PACKAGING:

ArmorLiner comes in 100-gallon drum kit: 50 gallons per drum Side A ISO and 50 gallons per drum Side B Polyol Resin.

SAFETY AND HANDLING:

Do not handle until the Safety Data Sheets (SDS) for each component have been read and understood. Regulations require that all employees be trained on Safety Data Sheets for all chemicals with which they come into contact.

THIS PRODUCT CONTAINS ISOCYANATE AND CURATIVE MATERIAL:

If stored for a long period of time, rotate drums (both Side A and Side B) regularly. Do not open drums until ready to use.

TYPICAL USES:

ArmorLiner can be used for truck bed surfaces, but some of the other typical uses are:

• Vapor Barrier Utility Vehicles
• Cargo Liners Boat Linings
• Waterproof Decking Cargo Holds
• Horse Trailers Industrial Floorings
• Walkways Containment Areas
• Encapsulation of Fiberglass and Polystyrene Foams

If you would like to learn more about our polyurea products, click here.