This is the beta version of our projects map. Here you will find past projects we have been involved with.
Waterproofing
Mining
AFRICA
CHILE
AUSTRALIA
Secondary Containment
Sculpture Exhibit
Armored Trucks
AMERICA
SOUTH AMERICA
CANADA
Sewer Reclamation
ASIA
Custom Amusement Projects
EUROPE
PROTECTING YOUR WORLD!
SECONDARY CONTAINMENT
or splashing contaminants while loading. This job specified 80 mils of
ArmorLiner® applied over 10 oz non-woven geotextile.
SEWER RECLAMATION
air compressor mounted on a flatbed truck. He used a two-component pure
polyurea coating that was heated and applied in two coats to yield an
approximate total thickness of 60–80 mils (1,524–2,032 microns).
BLAST MITIGATION
substrates for explosive testing. For this particular project, 25 and 60KG of dynamite
at 5 meters distance were utilized. We are proud to announce that the results far
exceeded expectations and military personnel attending the test were impressed as
it far surpassed any other material used in previous projects.
air compressor mounted on a flatbed truck. He used a two-component pure
polyurea coating that was heated and applied in two coats to yield an
approximate total thickness of 60–80 mils (1,524–2,032 microns).
BLAST MITIGATION
WATERPROOFING
sprayed directly over the existing one. ArmorThane was hired to repair and waterproof several
exibits at the BioDome. Lets take a look at the steps involved in this project. First of all, the
system involves substrate preparation, in order to ensure a stable and clean substrate because
there were numerous discontinuities. Subsequently, the membranes in detachment were
removed. After the substrate preparation, it was necessary to apply a high-adhesion primer in
order to guarantee the correct adhesion to the existing substrate. Subsequently, HighLine 510H,
a pure polyurea spray-applied membrane was used. Finally, the STS aliphatic polyurethane top
coat was applied. Top coat in white color allows to have a high solar reflection, protection
against UV rays and improvement of the internal and external temperatures of the roof.
The ArmorThane work, through the inspection of one of our specialized technicians, allows to
identify the problems and to solve them definitively without removing the existing one, thus
reducing time and work costs.
WATERPROOFING
to seal and protect the roofs. ArmorLiner was applied to over 8,000 SQ Ft of roofing.
The ArmorThane work, through the inspection of one of our specialized technicians, allows to
identify the problems and to solve them definitively without removing the existing one, thus
reducing time and work costs.
WATERPROOFING
sprayed directly over the existing one. ArmorThane was hired to repair and waterproof several
exibits at the BioDome. Lets take a look at the steps involved in this project. First of all, the
system involves substrate preparation, in order to ensure a stable and clean substrate because
there were numerous discontinuities. Subsequently, the membranes in detachment were
removed. After the substrate preparation, it was necessary to apply a high-adhesion primer in
order to guarantee the correct adhesion to the existing substrate. Subsequently, HighLine 510H,
a pure polyurea spray-applied membrane was used. Finally, the STS aliphatic polyurethane top
coat was applied. Top coat in white color allows to have a high solar reflection, protection
against UV rays and improvement of the internal and external temperatures of the roof.
The ArmorThane work, through the inspection of one of our specialized technicians, allows to
identify the problems and to solve them definitively without removing the existing one, thus
reducing time and work costs.
SPRINTER VANS
Our spray on product is used both inside and out of the vans.
