Two ArmorThane products can be applied with a roll-on or trowel process. While these products are rolled on rather than sprayed, they are still extremely durable. They are a perfect solution for professional applicators who have floor projects that don’t require the proportioning equipment and safety gear of the sprayed on polyurethane and polyurea.
Roll-on Coatings Products
ArmorFloor™ is a two component, aliphatic polyaspartic for use in moderate to severe chemical environments in indoor or outdoor applications. Its resilience, durability and UV resistance makes it an excellent choice for a broad range of uses. Slip resistance Color Quartz or other abrasive materials may be applied. Decorative Color Chips are often used for design.
[bafis_image before_img="https://www.armorthane.com/wp-content/uploads/2022/03/DSC00258-992x558.jpg" after_img="https://www.armorthane.com/wp-content/uploads/2022/03/DSC00366-992x558.jpg"]
ArmorDeck Coating – Two Step Process
ArmorDeck™ Basecoat SF is a single component, high solids, solvent free, low odor, environmentally safe, liquid applied, moisture cured, aromatic urethane polyurea elastomeric waterproofing base membrane. It is typically used as an exterior coating on concrete or plywood decks, patios, walkways, marinas and sports areas.
ArmorDeck Topcoat is a polyester, aliphatic, single component, liquid applied, moisture cured, urethane polyurea surface protection coating. This adds durability, excellent weatherability, seamless waterproofing membrane, UV resistance and abrasion resistance. It is imperative that ArmorDeck Topcoat be applied within 48 hours.
Slip resistance Color Quartz or other abrasive materials may be applied. Decorative Color Chips are often used for design.
|Physical Properties||Tear*||Tensile*||Elongation*||Surface Hardness*|
|ArmorDeck Base||ASTM D-624 200-240 pli||ASTM D-412 870-1070 psi||ASTM D-412 575-675%||ASTM D-2240 45-55 Shore A|
|ArmorDeck Topcoat||ASTM D-624 500-600 pli||ASTM D-412 3900-4500 psi||ASTM D-412 225-275%||ASTM D-2240 90-100 Shore A|